Mitutoyo SURFTEST SJ-410 - Page 244

No. 99MBB765A
8-12
mr Setup screen
c Touch .
 The set reference line is displayed on the mr Setup screen.
mr Setup screen
3
Set the slice depth.
a Touch .
Slice Depth Setup screen
b Input the slice depth.
The input range is as follows:
0.0 - 9999.99 µm (0.0 - 393700.393 µin)
TIP
• Touching clears the value.
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
mr Setup screen
c Touch .
 The set slice depth is displayed on the mr Setup screen.
mr Setup screen
4
Set the number of sections.
a Touch .