Mitutoyo SURFTEST SJ-410 - Page 255

8. MODIFYING PARAMETERS
No. 99MBB765A
8-23
Upper Limit Setup screen
c Set the upper limit value.
When the value is set, touch
.
TIP
• If the upper limit is set to 0, GO/NG judgment for the
upper limit will be disabled.
• Touching
sets the value to 0.
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Lower Limit Setup screen
d To set the lower limit value, touch .
Lower Limit Setup screen
e Set the lower limit value.
When the value is set, touch
.
TIP
• If the lower limit is set to 0, GO/NG judgment for the
lower limit will be disabled.
• Touching
sets the value to 0.
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
GO/NG Judgment Rule Setup screen
 The set GO/NG judgment rule and the set upper and lower
limit values are displayed on the GO/NG Judgment Rule
Setup screen.