Mitutoyo SURFTEST SJ-410 - Page 378

No. 99MBB765A
15-2
■ Accessing the Preliminary Measurement screen
Home screen
1 Press
on the Home screen to display the Main Menu
screen.
Main Menu screen
2
Touch .
Preliminary Measurement Setup screen
 The Preliminary Measurement Setup screen appears.
TIP
• Touch [Guidance Button] to display the Guidance screen and confirm the meaning
and function of the button icons on the screen. For information about the Guidance
screen, refer to "17.1 Guidance Screen" (page 17-1).
IMPORTANT
• Before using the tilt adjustment function, perform calibration. Otherwise, calculation for
tilt adjustment cannot be performed correctly.
• After replacing the stylus with another type, select the same type of stylus as the newly
mounted stylus on the stylus selection window.
"Environment setting (Main menu) ⇒
Stylus" If the mounted stylus differs from the stylus selected on the stylus selection
screen, tilt adjustment may not be performed.