No. 99MBB765A
Drive Unit Tilt Adjust screen
After the completion of measurement, retract the stylus and touch
.
Drive Unit Tilt Adjust screen
Turn the tilt knob in the plus direction only by the amount of the
correction value, and touch
.
NOTE
• The plus direction and minus direction of the correction
value vary depending on the tilt.
Drive Unit Tilt Adjust screen
Adjustment has been completed.
Touch
[Close] to return to the Preliminary Measurement
screen.
NOTE
• Perform the procedure above again to make sure that the measuring surface has been
leveled.
• To level the measuring surface more precisely, repeat the above works.
To Next Page
Loading...
