Mitutoyo SURFTEST SJ-410 - Page 416

No. 99MBB765A
16-14
Start Point Entry screen
4
Enter the start point position (ruler 1 position).
TIP
•
For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Specify Step screen
5
Touch .
End Point Entry screen
6
Enter the end point position (ruler 2 position).
TIP
• For information about numeric va
lue entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Specify Step screen
7
Touch .
Step Calculation Position Entry screen
8
Enter the position for the step calculation.
TIP
•
For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).