Mitutoyo SURFTEST SJ-410 - Page 441

16. DISPLAYING AND ANALYZING THE EVALUATION PROFILES AND GRAPHS
No. 99MBB765A
16-39
Analyze Step Area screen
5
Touch a place to set the ruler 2.
To adjust the ruler position, touch
/ .
Analyze Step Area screen
6
Touch [Calculate].
Analyze Step Area screen
7
The results of concave step area analysis are displayed on the
screen.
■ Specifying the X-coordinate by entering the values
(Refer to 16.1 "■ Accessing the Analyze Waveform screen".)
Home screen ⇒ [Evaluation Profile] ⇒ [Analyze Waveform]
Analyze Waveform screen
1
Touch .
NOTE
• When R-Motif or W-Motif is selected for a profile motif,
the step area cannot be analyzed.