Mitutoyo SURFTEST SJ-410 - Page 443

16. DISPLAYING AND ANALYZING THE EVALUATION PROFILES AND GRAPHS
No. 99MBB765A
16-41
Slice Level Entry screen
7
Enter the ruler 1 position (slice level).
TIP
•
For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Specify Step Area screen
8
Touch
[OK].
Step Area screen
9
Touch [Calculate].
Analyze Step Area screen

The step area is displayed on the Analyze Step screen.
TIP
• When is pressed on this screen, the profile is
printed with the coordinate difference position and ruler
displayed.