7 Attach the drive unit mount board to the rear of the drive/detector unit using the 2
mount board securing screws.
8 Align the protrusion of the automatic positioning unit with the position of the drive
unit mount board to attach it.
Mounting screws (M4 x 8)
Automatic positioning unit
Drive unit mount board
Drive/detector unit
Drive/detector unit
Protrusion
Drive unit mount board
9 Tighten the 3 supplied screws to secure the automatic positioning unit and the drive
unit.
Automatic positioning unit
Drive/detector unit
Drive/detector unit securing screw (M4 x 8)
10 Connect the automatic positioning unit cable and drive unit cable to the display unit
connector.
Automatic positioning unit connector
Display unit
Drive unit connector
No. 99MBB765A
19-20
To Next Page
Loading...
