Mitutoyo SURFTEST SJ-410 - Page 522

No. 99MBB765A
22-16
Stylus name
Part No.
Tip radius
Tip
Angle B
Small hole and deep hole 2X stylus
*12AAE892
2 μm
(78.740 μin)
60°
*12AAE908
5 μm
(196.850 μin)
90°
Deep groove 2X (20 mm/0.078 in) stylus
*12AAE893
2 μm
(78.740 μin)
60°
*12AAE909
5 μm
(196.850 μin)
90°
Deep hole 2X stylus for deep groove
(30 mm/1.181 in)
*12AAE894
2 μm
(78.740 μin)
60°
*12AAE910
5 μm
(196.850 μin)
90°
Deep groove (40 mm/1.574 in) stylus
*12AAE895
2 μm
(78.740 μin)
60°
*12AAE911
5 μm
(196.850 μin)
90°
Deep hole 2X stylus for gear tooth surface
*12AAE896
2 μm
(78.740 μin)
60°
*12AAE912
5 μm
(196.850 μin)
Deep hole 2X stylus for hole measurement corner
*12AAM601
2 μm
(78.740 μin)
60°
*12AAM603
5 μm
(196.850 μin)
If a stylus with * mark is used, the detector's measuring force will not be covered under warranty.
Detailed
drawing of A