Mitutoyo SURFTEST SJ-410 - Page 543

22. PRODUCT SPECIFICATIONS
No. 99MBB765A
22-37
Data Bytes: number of bytes from the tip of data
Bytes
Settings
Description
0
* (2 profiles selected)
0: A conditions, 1: B conditions
1
＊ (standard)
0: JIS1982, 1: JIS1994, 2: JIS2001, 3: ISO1997, 4: ANSI,
5: VDA, 6: Free
2
* (Profile)
0: P, 1: R, 2: DF, 3: R-MOTIF, 5: W
3
* (Filter)
0: 2CR75, 1: PC75, 2: GAUSS, 3: None
4
* (Cutoff length λs)
0: 2.5 um (98.425 uin), 1: 8 um (314.960 uin),
2: 25 um (984.251 uin) 3: None
5
* (Cutoff length λc, Sampling
length L)
0: 0.08 mm (0.003 in), 1: 0.25 mm (0.009 in),
2: 0.8 mm (0.031 in), 3: 2.5 mm (0.098 in), 4: 8 mm (0.314 in),
5: 25 mm ( 984.251 uin)
6
* (Cutoff length λf)
0: 0.25 mm (0.009 in), 1: 0.8 mm (0.031 in),
2: 2.5 mm (0.098 in), 3: 8 mm (0.314 in), 4: NONE
7
** (Number of sampling lengths)
00 - 20 (00 is designate arbitrary length.)
9
**.** (Arbitrary length)
0.10-50.80
(effective when the number of sampling length is "00")
14
** (Upper limit of motif length A)
0: Arbitrary length, 1: 0.02 mm (0.0 in), 2: 0.1 mm (0.003 in),
3: 0.5 mm (0.019 in), 4: 2.5 mm (0.098 in)
15
** (Upper limit of motif length B)
0: Arbitrary length, 1: 0.1mm (0.003 in), 2: 0.5mm (0.019 in),
3: 2.5 mm (0.098 in), 4: 12.5 mm (0.492 in)
16
**.**
(Arbitrary maximum length A)
0.01 - 50.79 mm (0.001 - 1.999 in)
21
**.**
(Arbitrary maximum length B)
0.01 - 50.79 mm (0.001 - 1.999 in)
COB command
This command reads whether the setting to perform calculation process with B conditions
is specified.
• Command
Header
Sub-field
EM
RD
COB
CR
• Response
Header
Data
EM
OK
＊
CR
0: Not performed, 1: Performed