2. OUTLINE OF THE SJ-410, FUNCTIONS AND KEY OPERATIONS
No. 99MBB765A
■ Buttons on Drive Unit Operation screen
The drive unit moves to the narrow-area measurement starting
position.
Set the current position of the detector to zero.
Set the current position of the detector to a desired value.
The drive unit moves to the measurement starting position.
Lower the detector to the measurement starting position.
Switches the measurement ranges.
Move the detector horizontally.
Move the detector vertically.
Retract the detector.
Sets the auto-start function.
Set the auto-return function.
■ Buttons on Evaluation Profile screen
Switches the evaluating condition A and B.
Performs waveform analysis.
Zooms the waveform in/out in the horizontal direction.
To Next Page
Loading...
