Dehumidification Heater (PFU)
D0CA/D0C9/D0C8/D0CB 2-128 SM
14. Reattach the PSU exhaust fan (FAN4).
• Confirm the above connecters are connected to the PSU exhaust fan (FAN4) when
attaching the PSU exhaust fan (FAN4).
15. Slide in the tray heater [A], and pass the heater harness [B] through the square hole [C].
16. Install the tray heater [A] in the paper feed unit.
To Next Page
Loading...
