Remote control commands
R&S
®
RTP
2068User Manual 1337.9952.02 ─ 12
Return values:
<FrameType> TSEQ | TS1 | TS1A | TS1B | TS2 | SLF | U2IT | VDT | PCAP |
PCNF | PCNR | LDM | ACK | NRDY | ERDY | STATus | STALl |
FWAKe | LTM | BIAM | HRR | SSPD | PING | PNGR | DPH |
DPHN | DPP | DPPA | ITP | LC | SKIP | BRST | BDAT | BERC |
BCNT | IDLE | CP0 | CP1 | CP2 | CP3 | CP5or6 | UHP | ULMP |
UTP | UDVN | UDEF | ERRor | CTLB | DATB | SYNC | SDS
For a description of the frame types, see "Frame types"
on page 830.
*RST: UDEF
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:STATe?
Returns the status of the frame with the selected frame number (for the selected serial
bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
Return values:
<State> OK | INComplete | UNCorrelated | UNKNown | AMB | CRC |
LENGth | VOOR | SYMB
VOOR
Value out of range
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:STARt?
Returns the start time of the frame with the selected frame number (for the selected
serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
Default unit: s
Usage: Query only
Protocols
To Next Page
Loading...
