Rohde & Schwarz RTP Series - Page 2067

Remote control commands
R&S
®
RTP
2067User Manual 1337.9952.02 ─ 12
BUS<m>:USBThree:RESult:FCOunt?............................................................................ 2067
BUS<m>:USBThree:RESult:FRAMe<n>:INFO?.............................................................. 2067
BUS<m>:USBThree:RESult:FRAMe<n>:TYPE?............................................................. 2067
BUS<m>:USBThree:RESult:FRAMe<n>:STATe?.............................................................2068
BUS<m>:USBThree:RESult:FRAMe<n>:STARt?.............................................................2068
BUS<m>:USBThree:RESult:FRAMe<n>:STOP?............................................................. 2069
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:TYPE?.................................................2069
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STATus?.............................................. 2069
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STARt?................................................ 2070
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:STOP?.................................................2070
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:VAL?................................................... 2070
BUS<m>:USBThree:RESult:FRAMe<n>:FLD<o>:FVAL?................................................. 2071
BUS<m>:USBThree:RESult:FCOunt?
Returns the number of decoded frames in the selected serial bus.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:INFO?
Returns specific frame information details of the selected frame. This information is
also shown in the "Info" column of the decode results table.
Suffix:
<m>
.
1..4
<n> *
Specifies the frame number.
Return values:
<Info>
Usage: Query only
BUS<m>:USBThree:RESult:FRAMe<n>:TYPE?
Returns the frame type for the selected serial bus and frame number.
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
Protocols