Rohde & Schwarz RTP Series - Page 2085

Remote control commands
R&S
®
RTP
2085User Manual 1337.9952.02 ─ 12
Frame
number
Frame name Field
number
Field name
2 NumDataObjs
3 MsgID
4 PwrRole/Plug
5 Rev
6 DataRole
7 MsgType
8 Chunked
9 Chunk Num
10 Req Chunk
11 Data Size
12 DATA
TRIGger<m>:USBPd:ERENable....................................................................................2085
TRIGger<m>:USBPd:ERRor<n>:ENABle....................................................................... 2085
TRIGger<m>:USBPd:FRENable....................................................................................2086
TRIGger<m>:USBPd:FRAMe<n>:ENABle...................................................................... 2086
TRIGger<m>:USBPd:FIENable..................................................................................... 2086
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:ENABle..........................................................2086
TRIGger<m>:USBPd:BIT..............................................................................................2087
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:BIT................................................................2087
TRIGger<m>:USBPd:DMAX..........................................................................................2087
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:DMAX........................................................... 2087
TRIGger<m>:USBPd:DMIN...........................................................................................2088
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:DMIN.............................................................2088
TRIGger<m>:USBPd:DOPerator................................................................................... 2088
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:DOPerator..................................................... 2088
TRIGger<m>:USBPd:IMAX...........................................................................................2088
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMAX.............................................................2088
TRIGger<m>:USBPd:IMIN............................................................................................ 2089
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IMIN..............................................................2089
TRIGger<m>:USBPd:IOPerator.....................................................................................2089
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:IOPerator.......................................................2089
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:BIT................................................................2089
TRIGger<m>:USBPd:ERENable <ErrorName>, <Enabler>
TRIGger<m>:USBPd:ERRor<n>:ENABle <Enable>
Enables or disables the checking condition for a specific error in the selected field of
the selected frame.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Protocols