Rohde & Schwarz RTP Series - Page 2172

Remote control commands
R&S
®
RTP
2172User Manual 1337.9952.02 ─ 12
BUS<m>:DDR:RESult:FRAMe<n>:STATe?.....................................................................2174
BUS<m>:DDR:RESult:FRAMe<n>:STOP?..................................................................... 2175
BUS<m>:DDR:RESult:FRAMe<n>:TYPE?......................................................................2175
BUS<m>:DDR:RESult:FCOunt?
Returns the number of decoded frames in the selected serial bus.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:FLD<o>:FVAL?
Returns the formatted value of the field with the selected field number within the frame
with the selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Return values:
<FrameByteValue>
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:FLD<o>:STARt?
Returns the start time of the field with the selected field number within the frame with
the selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Protocols