Rohde & Schwarz RTP Series - Page 260

Triggers
R&S
®
RTP
260User Manual 1337.9952.02 ─ 12
Bit pattern length, Bit pattern length A, Bit pattern length B
Sets the length of the bit pattern. You can select a value of up to 160 bits.
Remote command:
TRIGger<m>:SERPattern:BITPattern:PTALength on page 1282
TRIGger<m>:SERPattern:BITPattern:PTBLength on page 1283
Bit pattern, Bit pattern A, Bit pattern B
Defines the bit pattern in binary or hex format to.
The bit pattern editor helps you to enter the pattern, see Chapter 13.1.7, "Bit pattern
editor", on page 519.
Remote command:
TRIGger<m>:SERPattern:BITPattern:APATtern on page 1282
TRIGger<m>:SERPattern:BITPattern:BPATtern on page 1282
High-speed serial pattern trigger (Option R&S
RTP-K140/K141)