Rohde & Schwarz RTP Series - Page 265

Triggers
R&S
®
RTP
265User Manual 1337.9952.02 ─ 12
Alignment
Selects one of the comma control symbols (K28.1, K28.5, K28.7) used for synchroniza-
tion.
Remote command:
TRIGger<m>:SERPattern:EBTB:ALIGnment on page 1289
Scramble
Selects if the data is scrambled or unscrambled.
Remote command:
TRIGger<m>:SERPattern:EBTB:SCRMble on page 1291
8b/10b table
In this table, you can define up to 16 symbols.
"K/D symbol"
Selects the data characters (Dx.y) or the control characters (Kx.y)
"8b bit"
Sets the 8b bit value.
"10b bit RD+"
Displays the value for the positive running disparity.
"10b bit RD-"
Displays the value for the negative running disparity.
"Insert"
Inserts an entry before the currently selected row.
"Append"
Inserts an entry at the end of the table.
"Remove"
Removes an entry.
"Clear"
Clears all entries.
Remote command:
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:KDSYmbol on page 1291
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:EBIT on page 1291
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:DMINus? on page 1290
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:DPLus? on page 1291
TRIGger<m>:SERPattern:EBTB:APPend on page 1289
TRIGger<m>:SERPattern:EBTB:COUNt? on page 1289
TRIGger<m>:SERPattern:EBTB:CLEar on page 1289
Disparity error
Enables triggering on violation of the disparity condition.
Remote command:
TRIGger<m>:SERPattern:EBTB:ERRor<n>:DISParity on page 1290
Symbol error
Enables triggering on symbol errors. A symbol error occurs, when the decoded symbol
cannot be found in the table of 8B/10B data symbol codes .
Remote command:
TRIGger<m>:SERPattern:EBTB:ERRor<n>:SYMBol on page 1290
6.10.2.6 128b/132b and 128b/130b
The 128b/132b code is, for example, used for high-speed transmission rates of 10
Gbps USB 3.1 Gen2.
High-speed serial pattern trigger (Option R&S
RTP-K140/K141)