Rohde & Schwarz RTP Series - Page 640

Protocol analysis
R&S
®
RTP
640User Manual 1337.9952.02 ─ 12
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:SCONdition on page 1742
SEARch:TRIGger:ETHernet:FRAMe:SMIN on page 1742
SEARch:TRIGger:ETHernet:FRAMe:SMAX on page 1743
Length/Type ← Frame
To search for a frame length or frame type, a type/length pattern or optionally a range
of type/length patterns have to be specified.
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:TCONdition on page 1743
SEARch:TRIGger:ETHernet:FRAMe:TMIN on page 1743
SEARch:TRIGger:ETHernet:FRAMe:TMAX on page 1744
Frame check ← Frame
To search for a specific pattern, this pattern or optionally a range of patterns have to be
specified.
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:CCONdition on page 1744
SEARch:TRIGger:ETHernet:FRAMe:CMIN on page 1744
SEARch:TRIGger:ETHernet:FRAMe:CMAX on page 1745
Error Condition
Searches for the following error conditions: "Preamble Error" or "Length Error".
Preamble Error ← Error Condition
Searches for any preamble errors.
Remote command:
SEARch:TRIGger:ETHernet:ERRor:PREamble on page 1745
Length Error ← Error Condition
Searches for any length errors.
Remote command:
SEARch:TRIGger:ETHernet:ERRor:LENGth on page 1745
Ethernet 10BASE-T and 100BASE-TX (option R&S
RTP-K8)