Protocol analysis
R&S
®
RTP
672User Manual 1337.9952.02 ─ 12
For general information on how to handle the search functionality, see Chapter 11,
"Search functions", on page 448.
13.11.5.1 1000BASE-T1 search setup
Access: [Protocol] > "Shortcuts" tab > "Setup search"
Search criteria
Use the "Search criteria" dialog to define the event types to be searched.
Type
Selects the search type for 1000BASE-T1 analysis.
Remote command:
SEARch:TRIGger:TBTO:TYPE on page 1805
Frame Start ← Type
Searches for the start of frame.
MAC Frame ← Type
Searches for a Media Access Control (MAC) frame that matches the specified Destina-
tion address, Source address, Length/Type, Frame check, Data or Index condition.
The frame contains addresses of the devices and MAC control information that define
how to go about transmitting and receiving frames.
Ethernet 1000BASE-T1 (option R&S RTP-K58)
To Next Page
Loading...
