Rohde & Schwarz RTP Series - Page 902

Protocol analysis
R&S
®
RTP
902User Manual 1337.9952.02 ─ 12
A ← MRReset ← DLLP MRDLLP conditions
Searches for the value of the A bit (Ack/ Request).
Remote command:
SEARch:TRIGger:PCIE:DLLP:MULT:RESA on page 2151
VH Group ← MRReset ← DLLP MRDLLP conditions
Searches for the selected virtual hierarchies group.
Remote command:
SEARch:TRIGger:PCIE:DLLP:MULT:VHGR on page 2152
DLLP ACK/NAK conditions
Searches for an acknowledgement (ACK)/ negative acknowledgment (NAK).
Sequence ← DLLP ACK/NAK conditions
Searches for the sequence field indicating what TLPs are affected by the ACK/NAK.
Remote command:
SEARch:TRIGger:PCIE:DLLP:SEQ on page 2153
DLLP Init FC1/InitFC2/UpdateFC conditions
Searches for flow control initialization/update conditions.
Credit Type ← DLLP Init FC1/InitFC2/UpdateFC conditions
Searches for a credit type value.
"Any"
Searches for any credit type.
"P"
Searches for posted requests.
"NP"
Searches for non posted requests.
"CPL"
Searches for completions.
Remote command:
SEARch:TRIGger:PCIE:DLLP:FCTL:CRET on page 2149
VC ID ← DLLP Init FC1/InitFC2/UpdateFC conditions
Searches for a virtual channel ID value.
PCIe (option R&S
RTP-K72/K73)