Scanlab RTC6 PCIe Board - Page 28

RTC6 boards
Doc. Rev. 1.0.21 en-US
1 About this Manual
28
innovators for industry
Microstep See Chapter 7.1.2 ”Microstepping”, page 140.
Microvector The term refers to micro_vector[*] Commands, see Chapter 8.8
”micro_vector[*] Commands”, page 273.
micro_vector[*] Command All commands with “micro_vector” as part of their names.
See Chapter 8.8 ”micro_vector[*] Commands”, page 273.
MSB Most Significant Bit.
NAND Memory Non-volatile memory on the RTC6 Ethernet Board.
Synonym: NAND flash.
NULL Means on the one hand the number 0, on the other hand a pointer
with the value 0. The spelling for this is different in the different
programming languages.
OIE Open Interface Extension.
SCANLAB product (hardware). See SCANLAB website.
PCB Printed Circuit Board.
PID Proportional–Integral–Derivative.
Category of controller.
Pixel Mode Brief for “Pixel Output Mode”. See Chapter 8.7 ”Pixel Output Mode”,
page 263.
Polyline A direct sequence of [*]mark[*] Commands or “Arc” Commands. The
marking is continuous. Synonym: polygonal chain, polygonal line,
polygonal traversal.
PosAck “Position Acknowledge”, see PosAck Signal.