Scanlab RTC6 PCIe Board - Page 993

RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
993
innovators for industry
Changes to Document Revision 1.0.10 en-US from Document Revision 1.0.9 en-US
Changes to Document Revision 1.0.11 en-US from Document Revision 1.0.10 en-US
Where What
Global Document Revision
• 1.0.10 en-US
applies to RTC6 Software Package
• V1.7.11
(a)
Chapter 7.4.11 ”Pulse Synchronization
Mode”, page 208
Software change.
(a)
Chapter 8.2 ”Coordinate Transformations”,
page 224
Editorial enhancement. Notes on data recording, page 226.
eth_get_last_error, page 368 Software change.
(a)
New Bit 27.
regulation3, page 590 Software change.
(a)
New command.
set_defocus_list, page 625 Editorial enhancement. New comment, page 625.
set_duty_cycle_table, page 631 Software change.
(a)
New command.
set_laser_pulse_sync, page 675 Software change.
(a)
New command.
set_laser_timing_table, page 679 Software change.
(a)
New command.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .
Where What
Global Document Revision
• 1.0.11 en-US
applies to RTC6 Software Package
• V1.7.11
(a)
Chapter 18 ”Appendix C: The RTC6 EtherBox”,
page 932
Product renamed from “RTC6 Ethernet Plug-in+Box” to
“RTC6 EtherBox”. Removed: #145963, #146152, #146155,
#146368, #146371. Added: #148520. #148519.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .