Scanlab RTC6 PCIe Board - Page 994

RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
994
innovators for industry
Changes to Document Revision 1.0.12 en-US from Document Revision 1.0.11 en-US
Changes to Document Revision 1.0.13 en-US from Document Revision 1.0.12 en-US
Where What
Global Document Revision
• 1.0.12 en-US
applies to RTC6 Software Package
• V1.7.12
(a)
Section ”Folder RTC6 Tools”, page 34 Software change.
(a)
BIOS-ETH 29.
Chapter 16.7.1 ”Upgrading BIOS-ETH”,
page 909
Software change.
(a)
BIOS-ETH 29.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .
Where What
Global Document Revision
• 1.0.13 en-US
applies to RTC6 Software Package
• V1.7.12
(a)
control_command, page 346 Editorial change. 052A
H
: Stop Event Code 000D0
H
is not
intended for users.
Chapter 14.1 ”EU Declaration of Conformity
– RTC6 PCIe Board”, page 870
Editorial change. Replaces Chapter “Compliance with EC
Directive for Electromagnetic Compatibility (EMC)”.
Chapter 16.10.1
”EU Declaration of Conformity
– RTC6 Ethernet Board”, page 922
Editorial change. Replaces Chapter “Compliance with EC
Directive for Electromagnetic Compatibility (EMC)”.
Chapter 18.4.1 ”EU Declaration of Conformity
– RTC6 EtherBox”, page 937
Editorial enhancement.
Chapter 18.4.2 ”Compliance with FCC Rules”,
page 938
Editorial enhancement.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .