3 - 15
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Standby Modes
Extended . . . . . . . . . . . . . . . . . . Used as an alternative to shutting down the
HAPSITE. In Extended Standby Mode, the
NEG is heated and the ION pump remains on
to maintain vacuum in the MS and a higher
state of readiness. No gasses are required.
HINT: Extended Standby is the preferred
storage mode for the HAPSITE.
Cold . . . . . . . . . . . . . . . . . . . . . . Sets the system into a Cold Standby state,
which shuts down all heaters but leaves the
HAPSITE powered on. Used when attached
to the Service Module.
Return To Main Menu. . . . . . . . . . . Returns the system back to the HAPSITE
Main Menu.
To Next Page
Loading...
Need help?
General
