10 - 1
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Chapter 10
Saving and Managing Files
10.1 Saving Files on the HAPSITE
File types are created two ways, either by the HAPSITE software or user when
analyses are performed. The list of possible file types includes:
Method files
Event Log files
Data files
Tune files
Report files
10.1.1 Method Files
Method files are created using the HAPSITE Smart IQ software to direct the
instrument how to collect and analyze samples. Once created and saved, a Method
file can be selected to run samples. Method files are created and saved, using the
Method Editor, either to a directory on the PC or to the HAPSITE hard drive.
To save a newly created method from the Method Editor, press the Save button at
the bottom of the Method Editor window. The dialog window shown in Figure 10-1
is displayed. Notice that the default location to save a method file is to the
HAPSITE.
NOTE: Method files can be saved to the HAPSITE only if the HAPSITE is
connected to the PC. Refer to section 2.3.6, Connect Laptop (if desired),
on page 2-9 for additional information on how to connect the laptop and
HAPSITE.
To Next Page
Loading...
Need help?
General
