9 - 20
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Figure 9-20 RIC Plot
When the box in the Control Panel labeled -RIC is checked, the TIC/RIC window
will display the TIC minus the RIC selected.
9.7.1 RIC Plot to Locate Specific Compounds
NOTE: Before running NIST, position the scan cursor over the peak of interest in
the TIC plot.
1 Either from the System Setup View or the Data Review screen, double-click on
the NIST icon. See Figure 9-21.
Figure 9-21 NIST Icon
2 Click on the NAMES tab at the bottom of the NIST screen. See Figure 9-22.
Figure 9-22 NIST Names Tab
To Next Page
Loading...
Need help?
General
