Inficon HAPSITE Smart - Chapter 5 Operating HAPSITE in Laptop Mode; 5.1 Starting the HAPSITE in Laptop Mode

5 - 1
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Chapter 5
Operating HAPSITE in Laptop Mode
5.1 Starting the HAPSITE in Laptop Mode
Starting the HAPSITE in Laptop Mode refers to using the HAPSITE in conjunction
with the laptop computer. Refer to Chapter 8, Smart IQ Software for additional
information on the Smart IQ Software installed on the laptop computer.
Required Materials
 HAPSITE (AM)
 Internal standard gas canister
 Carrier gas canister
 Charged battery
 Probe
 Crossover ethernet cable
 Laptop computer
 Mouse (optional)
 Power supply
 AC To DC Power Converter power supply, unless powered by a Service
Module.
Procedure
1 Refer to Section 2.3, Basic Assembly, on page 2-4.
2 Press the power button on the inside of the front panel to turn on the
HAPSITE. The HAPSITE takes 1-2 minutes to power on. See Figure 5-1.
NOTE: The power button is a toggle switch. Once the power button has been
pressed and released, the power button returns back to the original
position.
HINT: If desired and equipped, the HAPSITE can be used with the laptop
computer connected via the wireless connection, see Chapter 4,
Wireless and USB for additional information on set-up and usage.