11 - 7
IPN 074-397-P1G
HAPSITE Smart Operating Manual
the instrument must be tuned, either with the Smart tune or manual tune
program, (see Chapter 7, Tune),
the instrument must be calibrated to the target compounds, as defined in
the analyte library file. (See Chapter 12, Target Compound Methods.)
11.3 Startup Page
The Startup Page, shown in Figure 11-5, allows for setting the initial parameters for
the HAPSITE system heaters and selection of the sample input device.
Figure 11-5 Method Editor Startup Page for GC/MS Methods
To Next Page
Loading...
