Inficon HAPSITE Smart - Page 346

11 - 8
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Figure 11-6 Method Editor Startup Page for Survey Methods
The parameters on the Startup page are:
Use Internal Standard . . . . . . . . . . This option is shown on the Startup Page for
survey methods. See Figure 11-6.
HAPSITE Temperatures (C)
Column . . . . . . . . . . . . . . . . . . . . . . The target temperature the system will
achieve on the Column before starting data
acquisition. (Not used for survey methods.)
Membrane . . . . . . . . . . . . . . . . . . . . The target temperature the system will
achieve on the Membrane before starting
data acquisition.
Valve Oven . . . . . . . . . . . . . . . . . . . The target temperature the system will
achieve in the Valve Oven before starting
data acquisition.