8 - 15
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Figure 8-29 HAPSITE Default Methods
The methods found in the Default Methods window are general purpose methods
for each of the HAPSITE Smart configurations.
3 min Carbon Conc cleanout. . . . . Method to clean the Tri-Bed and Carbopack
Concentrator tubes prior to analysis, 3
minutes.
3 min Tenax Conc Cleanout. . . . . . Method to clean the Tenax Concentrator tube
prior to analysis, 3 minutes.
Air 15 Min Carbon Conc. . . . . . . . . Basic Carbon Concentrator method, 15
minute analysis time.
Air 15 Min Loop . . . . . . . . . . . . . . . VOC and Chemical Warfare Agent analysis
using Sample Loop, 15 minute analysis time.
Air 15 Min Tenax Conc . . . . . . . . . . VOC and Chemical Warfare Agent Air
Analysis using Tenax Concentrator, 15
minute analysis sample time. 1 minute inlet
purge plus one minute sample collection.
HSS 15 Min Carbon Conc . . . . . . . VOC and Chemical Warfare Agent
Headspace Solid/Liquid analysis using the
Tri-Bed or Carbopack Concentrator, 15
minute analysis time.
HSS 15 Min Loop . . . . . . . . . . . . . . VOC and Chemical Warfare Agent
Headspace Solid/Liquid analysis using
Sample Loop, 15 minute analysis time.
To Next Page
Loading...
Need help?
General
