12 - 5
IPN 074-397-P1G
HAPSITE Smart Operating Manual
NIST Search . . . . . . . . . . . . . . . . . . The initial search when building a
template/library is performed using the
AMDIS library. If peaks are detected and
loaded into the template without an
identification, the NIST Search can be used
to identify these compounds.
# . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shows the analyte number in the library
D. . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Reference, shows the reference to the
data file in which the analyte was found.
Compound . . . . . . . . . . . . . . . . . . . Shows the compound name found in AMDIS,
NIST library or assigned by the user for the
analyte.
CAS #. . . . . . . . . . . . . . . . . . . . . . . . Shows the Chemical Abstracts Service
Number for the analyte from the AMDIS or
NIST library.
Q ION . . . . . . . . . . . . . . . . . . . . . . . . Shows the Quantitation Ion for the analyte.
Ret. Time . . . . . . . . . . . . . . . . . . . . . Show the Retention Time for the analyte.
Area . . . . . . . . . . . . . . . . . . . . . . . . . Displays the analyte integrated quantion
area.
Standard . . . . . . . . . . . . . . . . . . . . . Designates the compound as an Analyte or
an Internal Standard.
Conc: . . . . . . . . . . . . . . . . . . . . . . . . Shows the concentration of the analyte or
internal standard in the displayed file. (Note:
this field is not used if the concentration flag
is set to global.)
IS Ref . . . . . . . . . . . . . . . . . . . . . . . . Displays the Internal Standard reference
number for analyte quantitation.
To Next Page
Loading...
Need help?
General
