2 - 13
IPN 074-397-P1G
HAPSITE Smart Operating Manual
Transfer Line — A directional heated line which connects the HSS to the
HAPSITE, allowing sample transfer to the HAPSITE as well as communication
between the two instruments. INFICON part number 931-401-P2. Each end is
labeled to ensure proper orientation.
Transfer Line Insulation — This foam sleeve is used as insulation for the transfer
line. The insulation reduces the energy required to heat and maintain the
temperature of the Transfer Line, extending battery life. INFICON part number
931-405-P1.
Replacement Needle Kit — Replacement when the original needle for a worn,
plugged, or broken needle assembly. INFICON part number 931-402-P1.
HSS Carrying Shoulder Strap — A strap which connects to the strap mounts on
the sides of the HSS to facilitate carrying the instrument between the office and the
field; INFICON part number 036-015.
Y-Cable — A power cable to split the power from the AC to DC power converter to
both the HAPSITE and the HSS; INFICON part number 600-1131-P30.
To Next Page
Loading...
