Keysight M9421A - Page 1003

3 WLAN Mode
3.6 Modulation Analysis Measurement
Command
[:SENSe]:DEMod[:WLAN]:BE20:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG | OTHer
[:SENSe]:DEMod[:WLAN]:BE20:GINTerval?
Radio Std = 802.11be 40 MHz
[:SENSe]:DEMod[:WLAN]:BE40:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG | OTHer
[:SENSe]:DEMod[:WLAN]:BE40:GINTerval?
Radio Std = 802.11be 80 MHz
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG | OTHer
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval?
Radio Std = 802.11be 160 MHz
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval?
Radio Std = 802.11be 320 MHz
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval?
Example Radio Std = 802.11be 20 MHz
:DEM:BE20:GINT R1B4
:DEM:BE20:GINT?
Radio Std = 802.11be 40 MHz
:DEM:BE40:GINT R1B4
:DEM:BE40:GINT?
Radio Std = 802.11be 80 MHz
:DEM:BE80:GINT R1B4
:DEM:BE80:GINT?
Radio Std = 802.11be 160 MHz
:DEM:BE160:GINT R1B4
:DEM:BE160:GINT?
Radio Std = 802.11be 320 MHz
:DEM:BE320:GINT R1B4
:DEM:BE320:GINT?
Couplings When Radio Std Detection is set to Auto Detect, EHT Guard Interval is coupled to “Auto Detect”
When EHT-LTF Size is set to “Auto Detect”, EHT Guard Interval is coupled to “Auto Detect”
When HE-LTF Size is set to “From SIG Syms”, EHT Guard Interval is coupled to “From SIG Syms”
Preset
AUTO
State Saved Saved in instrument state
Range
AUTO|R1B4|R1B8|R1B16|SIG|OTHer
1003 WLAN Mode User's &Programmer's Reference