3 WLAN Mode
3.12 IQ Waveform Measurement
Remote Command
:INSTrument:COUPle:EMC:STANdard ALL | NONE
:INSTrument:COUPle:EMC:STANdard?
Example
:INST:COUP:EMC:STAN ALL
:INST:COUP:EMC:STAN?
Dependencies Only available if Option EMC is installed
Preset Set to OFF on Global Settings, Restore Defaults and System, Restore Defaults, All Modes
Range
ALL | NONE
Restore Defaults
Resets all functions in the Global settings menu to OFF. Pressing System, Restore
Defaults, All Modes has the same effect.
Remote Command
:INSTrument:COUPle:DEFault
Example
:INST:COUP:DEF
Backwards Compatibility
SCPI
:GLOBal:DEFault
3.12.8.5 Sample Period (Aperture) Setting (Remote Query Only)
Returns the time between samples (sample period or aperture).
Remote Command
[:SENSe]:WAVeform:APERture?
Example
:WAV:APER?
Couplings Coupled to Sample Rate by the following equation
Sample Period = 1/(Sample Rate)
Preset 1/(Sample Rate Default)
Min/Max 1/(Max Sample Rate)/1/(Min Sample Rate)
3.12.9 Sweep
Accesses controls to configure and control the acquisition of data, and the X-axis
parameters of the instrument.
Depending on the selected mode and measurement, these controls might include:
Sweep Time, Continuous/Single, Pause/Resume, X Scale and Number of Points.
WLAN Mode User's &Programmer's Reference 1852
To Next Page
Loading...
