3 WLAN Mode
3.6 Modulation Analysis Measurement
Segment Number
Selects the segment to be analyzed.
Couplings Available when Radio Std is set to 802.11ac/ax 80+80MHz
State Saved Saved in instrument state
Meas Setup Summary Table
Lets you view and access many of the parameters in the Meas Setup menus on one
screen.
Common
You can set up the following parameters on the same page.
–
Avg|Burst Number
–
Average Mode
–
Phase Noise Optimization
–
LO Dither
–
IF Gain
–
Search Length
–
Meas Interval
–
Meas Offset
–
Result Length
–
Max Result Length
Demod
You can set up the following parameters on the same page.
–
Modulation Format
–
Chip Rate
–
Descramble
–
Equalizer
WLAN Mode User's &Programmer's Reference 970
To Next Page
Loading...
