Keysight M9421A - Auto Scaling; 3.12.10 Trace

3 WLAN Mode
3.12 IQ Waveform Measurement
Auto Scaling
Toggles the scale coupling function ON or OFF.
Remote
Command
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:COUPle 0 | 1 | OFF | ON
:DISPlay:WAVeform:VIEW[1]|2:WINDow[1]:TRACe:X[:SCALe]:COUPle?
Example
:DISP:WAV:VIEW:WIND:TRAC:X:COUP ON
:DISP:WAV:VIEW:WIND:TRAC:X:COUP?
Couplings When Auto Scaling is ON and the Restart front-panel key is pressed, this function automatically
determines the scale per division and reference values based on the measurement results
When you set the value of either "Scale/Div" on page 1859 or "Ref Value" on page 1858 manually, Auto
Scaling automatically changes to OFF
Preset
ON
State Saved Saved in instrument state
Range
OFF|ON
3.12.10 Trace
There are no Trace controls in this measurement.
WLAN Mode User's &Programmer's Reference 1860