3 WLAN Mode
3.6 Modulation Analysis Measurement
Preset
OFF
State Saved Saved in instrument state
Range Normal | DELTa (D) | Off
Backwards Compatibility SCPI Commands
Sets or queries the state of a marker. Setting a marker that is OFF to state ON or 1
puts it in Normal mode and places it at the center of the screen.
Example
:CALC:EVM:MARK3:STAT ON
:CALC:EVM:MARK3:STAT?
Preset
OFF
State Saved Saved in instrument state
Range On|Off
Backwards
Compatibility
SCPI
:CALCulate:EVM:MARKer[1]|2|…|12:STATe OFF | ON | 0 | 1
:CALCulate:EVM:MARKer[1]|2|…|12:STATe?
Delta Marker (Reset Delta)
Pressing this button is exactly the same as pressing the “Delta” selection on the
Marker Mode radio button. The selected marker becomes a Delta Marker. If the
selected marker is already a Delta marker, the reference marker is moved to the
current position of the selected marker, thus resetting the Delta to zero.
Marker Settings Diagram
Lets you configure the Marker system using a visual utility.
All Markers Off
Turns off all markers.
Remote Command
:CALCulate:EVM:MARKer:AOFF
Example
:CALC:EVM:MARK:AOFF
Couple Markers
When this function is On, moving any marker causes an equal X Axis movement of
every other marker which is not Off. “equal X Axis movement” means to preserve the
difference between each marker’s X Axis value (in the fundamental x-axis units of
WLAN Mode User's &Programmer's Reference 962
To Next Page
Loading...
