3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
Option B85 = 80.0 MHz
Option B1X = 160.0 MHz
Option U-B85 = Upgrade from 40.0 MHz to 80.0 MHz
Option U-B1X = Upgrade from 80.0 MHz to 160.0 MHz
VXT models M9410A/11A (VXT2):
Option B40 = 40.0 MHz
M941xA-B3X = 300.0 MHz
M941xA-B6X = 600.0 MHz
M94xA-B12 = 1.2 GHz
M94xAU-B6X = Upgrade from 300.0 MHz to 600.0 MHz
M94xAU-B12 = Upgrade from 300.0 MHz to 1.2 GHz
M94xAU-BU1 = Upgrade from 600.0 MHz to 1.2 GHz
VXT models M9415A/16A(VXT3):
M941xA-B4X = 400.0 MHz
M941xA-B8X = 800.0 MHz
M941xA-B12 = 1.2 GHz
M941xAU-B6X = Upgrade from 400.0 MHz to 800.0 MHz
M941xAU-B12 = Upgrade from 400.0 MHz to 1.2 GHz
M941xAU-BU2 = Upgrade from 800.0 MHz to 1.2 GHz
All other models:
B1Y=160 MHz, B1X=140 MHz, B1A=125 MHz, B85= 85 MHz, B40=40 MHz, B25=25 MHz
When Info BW auto coupled by Radio Std exceeds max BW of hardware, there will be an error
message: “Invalid result; Wider BW required”
If BW is less than Radio Std default value, there will be a conditional warning message: “Setting Alert;
BW is less than xxx”
3.7.6 Display
The Display key opens the Display Menu, which lets you configure display items for
the current Mode, Measurement View or Window.
3.7.6.1 View
See "Views" on page 1129
View
Contains controls for selecting the current View, and for editing User Views.
WLAN Mode User's &Programmer's Reference 1172
To Next Page