Keysight M9421A - 3.8.7 Meas Setup; 3.8.7.1 Settings; Avg|Hold Number

3 WLAN Mode
3.8 Power vs Time Measurement
3.8.7 Meas Setup
The Meas Setup menu panel contains functions for setting up the measurement
parameters and also contains functions for setting up parameters global to all
measurements in the mode.
3.8.7.1 Settings
The Settings tab contains frequently used Meas Setup functions to which you will
want the fastest access.
Avg|Hold Number
–
Used to specify the number of data acquisitions that are averaged. After the
specified number of average counts, the averaging mode (termination control)
setting determines the averaging action.
–
On - Sets measurement averaging on.
–
Off - Sets measurement averaging off.
Remote Command
[:SENSe]:PVTime:AVERage:COUNt <integer>
[:SENSe]:PVTime:AVERage:COUNt?
[:SENSe]:PVTime:AVERage[:STATe] OFF | ON | 0 | 1
[:SENSe]:PVTime:AVERage[:STATe]?
WLAN Mode User's &Programmer's Reference 1386