Keysight M9421A - 3.4.6 Results for n = 7-11

3 WLAN Mode
3.4 SEM Measurement
The number of values returned is subject to change in future releases
3.4.6 Results for n = 7-11
n Data
7 Returns 30 comma-separated pass/fail test results (0 = passed, or 1 = failed) determined by testing the minimum
margin point from the limit line that is determined each offset's Limits setting
# Item
1 Reserved for future use, returns -999.0
2 Reserved for future use, returns -999.0
3
2k + 3, k = 0
At negative offset A
4
2k + 4, k = 0
At positive offset A
---
30
2k + 4, k = 13
At positive offset N
The number of values returned is subject to change in future releases
8 Returns 30 comma-separated pass/fail test results (0=passed, or 1=failed) determined by testing the minimum
margin point from the limit line that is determined each offset's Limits setting
# Item
1 Reserved for future use, returns -999.0
2 Reserved for future use, returns -999.0
3
2k + 3, k = 0
At negative offset A
4
2k + 4, k = 0
At positive offset A
---
30
2k + 4, k = 13
At positive offset N
The number of values returned is subject to change in future releases
9 Returns 30 comma-separated scalar values of frequency (in Hz) that have peak power from center or carrier edge
frequency in each offset, depending on the setting of "Offset Freq Define" on page 574
# Item
1 Reserved for future use, returns -999.0
2 Reserved for future use, returns -999.0
WLAN Mode User's &Programmer's Reference 470