Keysight M9421A - Page 471

3 WLAN Mode
3.4 SEM Measurement
n Data
# Item
3
2k + 3, k = 0
At negative offset A
4
2k + 4, k = 0
At positive offset A
---
30
2k + 4, k = 13
At positive offset N
If the result is not available, -999.0 is returned
The number of values returned is subject to change in future releases
10 Returns 30 comma-separated scalar values (in dBm) of the absolute peak power of the segment frequencies
# Item
1 Reserved for future use, returns -999.0
2 Reserved for future use, returns -999.0
3
2k + 3, k = 0
At negative offset A
4
2k + 4, k = 0
At positive offset A
---
30
2k + 4, k = 13
At positive offset N
If the result is not available, -999.0 is returned
The number of values returned is subject to change in future releases
11 Returns 30 comma-separated scalar values in dBc (dB if MeasType = PSD) of the peak power relative to the
carrier at the segment frequencies
# Item
1 Reserved for future use, returns -999.0
2 Reserved for future use, returns -999.0
3
2k + 3, k = 0
At negative offset A
4
2k + 4, k = 0
At positive offset A
---
30
2k + 4, k = 13
At positive offset N
471 WLAN Mode User's &Programmer's Reference