Keysight M9421A - Meas Preset; 3.12.8.2 Radio; Radio Std

3 WLAN Mode
3.12 IQ Waveform Measurement
Harmonics (SA Mode only)
Parameters affected by Auto Couple are:
–
Resolution Bandwidth
–
Fundamental Frequency
–
Dwell Time
–
Range Table Resolution Bandwidths
–
Range Table Dwell Times
Meas Preset
Restores all measurement parameters to their default values.
Remote Command
:CONFigure:WAVeform
Example
:CONF:WAV
Notes Restore default values of all parameters
3.12.8.2 Radio
Contains controls to select Radio Standard and settings.
Radio Std
In this menu, 7 groups of WLAN standards can be selected:
1.
802.11a/b/g/j/p includes 802.11a/g/j/p,802.11b/g,802.11g DSSS-OFDM,
802.11j/p 10M, 802.11p 5M
2.
802.11n includes 802.11n 20MHz and 802.11n 40MHz
3.
802.11ac includes 802.11ac 20MHz, 802.11ac 40MHz, 802.11ac 80MHz,
802.11ac 80+80MHz and 802.11ac 160MHz
4.
802.11ah includes 802.11ah1MHz, 802.11ah2MHz, 802.11ah4MHz,
802.11ah 8MHz, and 802.11ah16MHz
5.
802.11af includes 802.11af 6MHz, 802.11af 7MHz and 802.11af 8MHz
6.
802.11ax includes 802.11ax 20MHz, 802.11ax 40MHz, 802.11ax 80MHz,
802.11ax 80+80MHz and 802.11ax 160MHz
1835 WLAN Mode User's &Programmer's Reference