Keysight M9421A - Tx Chain Number of Each RU; User Number of Each RU

3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
Remote Command
[:SENSe]:DEMod[:WLAN]:RU:LIST:STATe OFF | ON | 0 | 1,…
[:SENSe]:DEMod[:WLAN]:RU:LIST:STATe?
Example
:DEM:RU:LIST:STAT 1,1,0,0,0,0,0,0,0
:DEM:RU:LIST:STAT?
Notes The length of the list is variable and determined by the number of RUs
Dependencies Only available for 802.11ax/ 802.11be
Preset
ON
State Saved Saved in instrument state
Tx Chain Number of Each RU
This parameter determines TX chain number of each RU.
This is a list of parameters, and the length of the list is the number of RUs.
Remote Command
[:SENSe]:DEMod[:WLAN]:RU:LIST:TXCHain <integer>,<integer>,<integer>,…
[:SENSe]:DEMod[:WLAN]:RU:LIST:TXCHain?
Example
:DEM:RU:LIST:TXCH 1,1
:DEM:RU:LIST:TXCH?
Notes The length of the list is variable and determined by the number of RUs
Dependencies Only available for 802.11ax/ 802.11be
Preset
1
State Saved Saved in instrument state
User Number of Each RU
This parameter determines user number of each RU.
This is a list of parameters, and the length of the list is the number of RUs.
Remote Command
[:SENSe]:DEMod[:WLAN]:RU:LIST:USER <integer>,<integer>,<integer>,…
[:SENSe]:DEMod[:WLAN]:RU:LIST:USER?
Example
:DEM:RU:LIST:USER 1,1
:DEM:RU:LIST:USER?
Notes The length of the list is variable and determined by the number of RUs
Dependencies Only available for 802.11ax/ 802.11be
Preset
1
State Saved Saved in instrument state
1259 WLAN Mode User's &Programmer's Reference