Keysight M9421A - 3.4.3 Results for n = 2-4; 3.4.4 Results for n = 5

3 WLAN Mode
3.4 SEM Measurement
# Item Unit
---
70
10k + 20,
k = 5
Peak power offset frequency from the center or carrier edge
frequency in the positive offset F
Depends on the setting of "Offset Freq Define" on page 574
Hz
71
2k + 71, k
= 0
Minimum margin from limit line on the negative offset A dB
72
2k + 72, k
= 0
Minimum margin from limit line on the positive offset A dB
--- dB
82
2k + 72, k
= 5
Minimum margin from limit line on the positive offset F dB
3.4.3 Results for n = 2-4
n Data
2 Returns the displayed frequency domain spectrum trace data for Trace 1 separated by commas
3 Returns the displayed frequency domain absolute limit trace data separated by commas
4 Returns the displayed frequency domain relative limit trace data separated by commas
3.4.4 Results for n = 5
Returns 30 comma-separated scalar values of the absolute integrated power of the
segment frequencies
k is an index for each offset: k = 0 for offset A; k = 1 for offset B; k = 2 for offset C, etc.
The number of offsets is 14 (A-N).
# Item Unit
1 Power
(*1)
"Measurement Type" on page 632 is PSD Ref: dBm/Hz
Others: dBm
2 Reserved for future use, returns -999.0
3
2k + 3, k = 0
Power
(*2)
at negative offset A
4
2k + 4, k = 0
Power
(*2)
at positive offset A
WLAN Mode User's &Programmer's Reference 468