3 WLAN Mode
3.6 Modulation Analysis Measurement
Marker Operation No
Corresponding Trace n=1 IQ Polar Metric trace
In Numeric Results,
–
“Avg” means the average of the individual measurements when averaging is on.
–
“Max” means the maximum of the individual measurements when averaging is
on.
–
“Min” means the minimum of the individual measurements when averaging is on.
3.6.2.2 I/Q Measured Polar
This Graph window appears in the following View:
View Size Position
I/Q Measured Polar Graph Full, two-thirds width Right
OFDM EVM Half, half width Lower left
Marker Operation Yes [Symbol or Chip – (X,Y)]
Corresponding Trace Corrected measured trace (n=7)
This trace is affected by I/Q Meas Polar view setting parameters
3.6.2.3 EVM vs. Chips
The EVM vs. Chips window appears in the following View:
View Size Position
I/Q Error Half, half width Lower left
Marker Operation Yes (Chips - EVM)
Corresponding Trace n=4 EVM trace
3.6.2.4 Mag Error
The Mag Error Graph window appears in the following View:
View Size Position
I/Q Error Half, half width Upper left
Marker Operation Yes (Chips – Magnitude)
Corresponding Trace n=5 Magnitude Error Trace
WLAN Mode User's &Programmer's Reference 880
To Next Page