Keysight M9421A - HE Other Guard Interval (Radio Std 802.11 ax)

3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
Radio Std = 802.11ax 80+80 MHz
[:SENSe]:DEMod[:WLAN]:AXT80:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:AXT80:GINTerval?
Radio Std = 802.11ax 160 MHz
[:SENSe]:DEMod[:WLAN]:AX160:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:AX160:GINTerval?
Example Radio Std = 802.11ax 20 MHz
:DEM:AX20:GINT R1B4
:DEM:AX20:GINT?
Radio Std = 802.11ax 40 MHz
:DEM:AX40:GINT R1B4
:DEM:AX40:GINT?
Radio Std = 802.11ax 80 MHz
:DEM:AX80:GINT R1B4
:DEM:AX80:GINT?
Radio Std = 802.11ax 80+80 MHz
:DEM:AXT80:GINT R1B4
:DEM:AXT80:GINT?
Radio Std = 802.11ax 160 MHz
:DEM:AX160:GINT R1B4
:DEM:AX160:GINT?
Notes Only 11ax HE Guard Interval gets AUTOAuto Detect selection
Couplings As Radio Std Detection is set to Auto Detect, HE Guard Interval is coupled to “Auto Detect”
As HE-LTF Size is set to “Auto Detect”, HE Guard Interval is coupled to “Auto Detect”
As HE-LTF Size is set to “From SIG Syms”, HE Guard Interval is coupled to “From SIG Syms”
Preset
AUTO
State Saved Saved in instrument state
Range
AUTO|R1B4|R1B8|R1B16|SIG|OTHer
HE Other Guard Interval (Radio Std 802.11ax)
Specifies the HE guard interval length for each symbol time, when HE Guard Interval
Selection is set to Other, this value will be used as HE Guard Interval.
Remote
Command
Radio Std = 802.11ax 20 MHz
[:SENSe]:DEMod[:WLAN]:AX20:GINTerval:LENGth <real>
WLAN Mode User's &Programmer's Reference 1226