3 WLAN Mode
3.8 Power vs Time Measurement
When a delta marker is changed to any other control mode, if its reference marker is
fixed then the reference marker is also turned off.
If you move a delta marker to a different trace, it is forced to Normal mode and if its
reference is fixed, the reference is turned off.
A delta marker is forced to Normal mode if you turn its reference off or if you move
its reference to another trace. (In the latter case the reference is not turned off even
if it is fixed.)
If you change the selected marker's reference (using the Marker, Properties, Relative
To), the selected marker is forced to Delta mode. This change of the selected marker
to Delta mode causes its new reference's control mode and position to change as
described above.
Marker Mode
Sets the marker control mode to Normal, Delta, or Off.
All interactions and dependencies detailed under the control description are
enforced when the remote command is sent. If the selected marker is Off, pressing
Marker sets it to Normal and places it at the center of the screen on the trace
determined by the Marker Trace rules.
The default active function is the active function for the currently selected marker
control mode. If the current control mode is Off, there is no active function and the
active function is turned off.
Remote
Command
:CALCulate:PVTime:MARKer[1]|2|...|12:MODE POSition | DELTa | OFF
:CALCulate:PVTime:MARKer[1]|2|...|12:MODE?
Example
:CALC:PVTime:MARK3:MODE POS
:CALC:PVTime:MARK3:MODE?
Notes NORMal is changed to POSition in the new SA.
Preset OFF
State Saved Saved in instrument state.
Range Normal | DELTa (D) | Off
Backward Compatibility SCPI Commands
Sets or queries the state of a marker. Setting a marker which is OFF to state ON or 1
puts it in Normal mode and places it at the center of the screen.
Remote Command
:CALCulate:PVTime:MARKer[1]|2|...|12:STATe OFF | ON | 0 | 1
:CALCulate:PVTime:MARKer[1]|2|...|12:STATe?
Example
:CALC:PVTime:MARK3:STAT ON
1375 WLAN Mode User's &Programmer's Reference
To Next Page
Loading...
