3 WLAN Mode
3.6 Modulation Analysis Measurement
Allows you to turn On or Off the compensation for IQ Gain Imbalance found in the
input signal.
If On, the IQ Gain imbalance in the signal will be compensated.
If Off, the IQ Gain Imbalance compensation will be bypassed.
Remote Command
:CALCulate:EVM:COMPensate:GAIN[:STATe] OFF | ON | 0 | 1
:CALCulate:EVM:COMPensate:GAIN[:STATe]?
Example
:CALC:EVM:COMP:GAIN 1
:CALC:EVM:COMP:GAIN?
Preset
ON
State Saved Saved in instrument state
Range On | Off
Quadrature Error
NOTE
This parameter is available when Radio Std is NOT 802.11a/b/g/j/p.
Allows you to turn On or Off the compensation for Quadrature Error found in the
input signal.
If On, the Quadrature Error in the signal will be compensated.
If Off, the Quadrature Error compensation will be bypassed.
Remote
Command
:CALCulate:EVM:COMPensate:QUADrature[:STATe] OFF | ON | 0 | 1
:CALCulate:EVM:COMPensate:QUADrature[:STATe]?
Example
:CALC:EVM:COMP:QUAD 0
:CALC:EVM:COMP:QUAD?
Preset
ON
State Saved Saved in instrument state
Range On | Off
Timing Skew
NOTE
This parameter is available when Radio Std is NOT 802.11a/b/g/j/p.
Allows you to turn On or Off the compensation for Timing Skew found in the input
signal.
1031 WLAN Mode User's &Programmer's Reference
To Next Page