Keysight M9421A - Other Guard Interval (Radio Std NOT 802.11 b;g(DSSS;CCK;PBCC) or 802.11 ax, 802...

3 WLAN Mode
3.9 Spectral Flatness Measurement
Radio Std = 802.11ac 20 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ac 40 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ac 80 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ac 80+80 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ac 160 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ah 1 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ah 2 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ah 4 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ah 8 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11ah 16 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11af 6 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11af 7 MHz
R1B4|R1B8|SIG|OTHer
Radio Std = 802.11af 8 MHz
R1B4|R1B8|SIG|OTHer
Other Guard Interval (Radio Std NOT 802.11b/g(DSSS/CCK/PBCC) or 802.11ax, 802.11be)
Specifies the guard interval (also called cyclic extension) length for each symbol
time.
When "Guard Interval Selection (Radio Std NOT 802.11b/g(DSSS/CCK/PBCC) or
802.11ax/be)" on page 1504 is set to Other, this value is available and used as
Guard Interval.
Remote
Command
Radio Std = 802.11a/g/j/p(OFDM 20 MHz)
[:SENSe]:DEMod[:WLAN]:AG:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:AG:GINTerval:LENGth?
WLAN Mode User's &Programmer's Reference 1508